CAH Profile 6 (LABCORP)

Test Code
1230006700


Alias/See Also
LAB7106: CAH Panel 6 | LABCORP EAP: 500175


CPT Codes
82157x1, 82626x1, 84403x1, 82634x1, 82533x1, 84143x1, 82633x1, 83498x1, 84144x1

Preferred Specimen
LABCORP LAB: RED TOP - PLAIN (Frozen) Min Vol: 3.5


Other Acceptable Specimens
LABCORP LAB: RED TOP SERUM ALIQUOT: (Frozen) Min Vol: N/A


Instructions
Preferred specimen: 6 mL whole blood collected in Green-top (Lithium Heparin) tube Special instructions: Fill a lithium heparin blood collection tube (minimum volume 6 mL) and gently mix by inverting the tube several times to dissolve the heparin.


Transport Temperature
Specimen: Whole blood Volume: 6 mL Minimum Volume: 6 mL Specimen Container: Green-Top (Lithium Heparin) Tube Specimen Collection: Fill a lithium heparin blood collection tube (minimum volume 6 mL) and gently mix by inverting the tube several times to dissolve the heparin. Storage Instructions: After collection, the blood can be held at room temperature (17 to 25 degrees Celsius) for up to three hours, and then placed at 2 to 8 degrees Celsius for up to 48 hours. Alternatively, blood can immediately be placed at 2 to 8 degrees Celsius for up to 48 hours. *After refrigeration, the lithium heparin tube MUST equilibrate to room temperature (17 to 25 degrees Celsius) prior to the transfer to QFT-Plus Blood Collection Tubes. *Aliquoted QFT-Plus Blood Collection Tubes should be placed in the 37 degree Celsius incubator within two hours of blood transfer. *NOTE: Total time from blood draw to incubation in QFT-Plus Blood Collection Tubes should NOT exceed 53 hours. Transport Temperature: Refrigerate


Report Available
LABCORP LAB
STAT: 5760 min
Routine: 5760 min
Extended TAT: No TAT min
Timed: 5760 min
Life or Death: 5760 min



Last Updated: March 6, 2023


The CPT Codes provided in this document are based on AMA guidelines and are for informational purposes only. CPT coding is the sole responsibility of the billing party. Please direct any questions regarding coding to the payor being billed. Any Profile/panel component may be ordered separately. Reflex tests are performed at an additional charge.